 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Single Pole OptoMOS(R) Relay PLA170 Load Voltage Load Current AC/DC Configuration DC Configuration Max RON AC/DC Configuration DC Configuration PLA170 800 100 180 50 14 Units VP mA mA Description The PLA170 is a 1-Form-A Solid State Relay which uses optically coupled MOSFET technology to provide enhanced input-to-output isolation of 3750Vrms. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically-coupled output is controlled by a GaAIAs infrared LED. The PLA170 is designed to replace electromechanical relays and offers the superior reliability associated with Solid State devices. This device provides bounce-free switching in a more compact surface mount or through hole package. Features * 100% Solid State * Small 6 Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * 800V blocking Approvals * UL Recognized File: E76270 * CSA Certified File: LR 43639-10 * Certified to: * EN 60950 * EN 41003 Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # PLA170 PLA170S PLA170STR Description 6 Pin DIP (50/tube) 6 Pin Surface Mount (50/tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA170 Pinout AC/DC Configuration + Control - Control NC 1 2 3 6 5 4 PLA170 Pinout DC Only Configuration + Control - Control NC 1 2 3 6 5 4 Load Do Not Use Load + Load - Load Switching Characteristics of Normally Open (Form A) Devices DS-PLA170-R01 www.clare.com 1 PLA170 Absolute Maximum Ratings (@ 25 C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 2 Ratings 800 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / C Derate Linearly 6.67 mw / C Electrical Characteristcs Parameter Conditions Output Characteristics @ 25C Load Current AC/DC Configuration 1 Continuous DC Configuration Peak Load Current 10ms On-Resistance 2 AC/DC Configuration IL= Load Current DC Configuration Off-State Leakage Current VL=800V Switching Speeds Turn-On IF=5mA, VL=10V Turn-Off IF =5mA, VL=10V Output Capacitance 50V; f=1MHz Input Characteristics @ 25C Input Control Current 3 IL=Load Current Input Dropout Current Input Voltage Drop IF=5mA Reverse Input Current VR=5V Common Characteristics @ 25C Input to Output Capacitance Input to Output Isolation 60 Hz, 60 seconds 1 2 3 Symbol Min Typ Max Units IL ILPK RON ILEAK TON TOFF COUT IF IF VF IR CI/O VI/O 5 0.3 0.9 3750 50 0.7 1.2 3 - 100 180 350 50 14 1 5 5 1.4 10 - mA mA A ms ms pF mA mA V A pF Vrms Load derates linearly from 100mA @ 25oC to 90mA @80oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. 2 www.clare.com R01 PLA170 PERFORMANCE DATA* PLA170 0 35 Device Count (N) 30 Device Count (N) 25 20 15 10 5 1.17 1.19 1.21 1.23 1.25 0 39 40 41 42 43 44 45 35 30 25 20 15 10 5 0 875 880 885 890 895 900 905 35 30 Device Count (N) 25 20 15 10 5 0 DC LED Forward Voltage Drop (V) Blocking Voltage (V) 25 20 15 10 5 0 PLA170 Typical IF for Switch Operation (N=50 Ambient Tempurature = 25C) (Load Current = 100mADC) 25 20 15 10 5 0 0 25 20 15 10 5 0 0 Device Count (N) Device Count (N) 0.39 0.65 0.91 1.17 1.43 1.69 1.95 0.39 0.65 0.91 1.17 1.43 1.69 1.95 Device Count (N) LED Current (mA) LED Current (mA) 0.30 0.35 0.40 0.45 0.50 0.55 0.60 Turn-On (ms) 35 30 25 20 15 10 5 0 0.070 0.075 0 220 200 Load Current (mA) 180 160 140 120 100 80 60 40 PLA170 Typical Maximum Load Current vs. Temperature DC Configuration 0.040 0.035 0.030 PLA170 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) IF = 10mA IF = 5mA 0.025 0.020 0.015 0.010 0.005 0 AC/DC Configuration -40 -20 0 20 40 60 80 IF = 5mA 0.080 0.085 0.090 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) 1050 Blocking Voltage (V) 1000 PLA170 Typical Blocking Voltage vs. Temperature 900 850 800 750 700 -40 -20 0 20 40 60 80 100 Turn-On (ms) 950 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 PLA170 Typical Turn-On vs. Temperature (Load Current = 70mADC) IF = 5mA IF = 10mA -40 -20 0 20 40 60 80 100 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 PLA170 Typical Turn-Off vs. Temperature (Load Current = 70mADC) Turn-Off (ms) IF = 5mA -40 -20 0 20 40 60 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R01 www.clare.com 3 PLA170 PERFORMANCE DATA* PLA170 Typical LED Forward Voltage Drop vs. Temperature PLA170 Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) PLA170 Typical Turn-Off vs. LED Forward Current (Load Current = 100mADC) LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 IF = 50mA IF = 10mA IF = 5mA -40 -20 0 20 40 60 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.35 0.30 Turn-Off (ms) 0.25 0.20 0.15 0.10 0.05 Turn-On (ms) 0 5 10 15 20 25 30 35 40 45 50 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Forward Current (mA) 60 50 40 30 20 10 0 PLA170 Typical On-Resistance vs. Temperature (Load Current = 50mADC) IF = 5mA LED Current (mA) 3.000 2.500 2.000 1.500 1.000 0.500 0.000 -40 PLA170 Typical IF for Switch Operation vs. Temperature (Load Current = 70mADC) 3.000 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0.000 -40 PLA170 Typical IF for Switch Dropout vs. Temperature (Load Current = 70mADC) -40 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 -20 0 20 40 60 80 100 150 Load Current (mA) Load Current (A) 100 50 0 -50 -100 -150 -6 -4 -2 0 2 4 6 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time PLA170 Energy Rating Curve 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R01 Manufacturing Information Soldering Recommended soldering processes are limited to 245C component body temperature for 10 seconds. 6 Pin DIP Through Hole (Standard) Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. PC Board Pattern (Top View) 6-0.800 DIA. (6-0.031 DIA.) MECHANICAL DIMENSIONS 7.239 TYP (0.285 TYP) 0.254 TYP (0.010 TYP) 6 Pin Surface Mount ("S" Suffix) PC Board Pattern (Top View) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) W = 16.30 MAX (0.642 MAX) B0 = 10.30 (0.406) Top Cover Tape Embossment Carrier K1 = 3.80 (0.150) K0 = 4.90 (0.193) P = 12.00 (0.472) A0 = 10.30 (0.406) Embossment User Direction of Feed Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA170-R01 (c)Copyright 2005, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 5/2/05 |
Price & Availability of PLA170
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |